After cooling the bearing housing, the coolant flowed into the coolant filler tank via a pipe.
Once boost pressure reached its maximum, the wastegate valve would open so that part of the exhaust gas would bypass the turbine and flow into the exhaust pipe.
A single timing belt was used to drive the four camshafts, while the back of the belt also drove the water pump.
It was the first time I had seen people who were confident, and with choices, up close.
I fiercely defend her right to do so.
They prove you have a work ethic, too.
Furthermore, a piezo-electric type knock sensor installed on the cylinder block which converted knocking vibrations into electric signals.
Jools pictured with her children.
The turbocharger was lubricated by the engine oil and used full-floating type bearings to form lubrication films.
Failure can be a good teacher.
Each camshaft was supported by three journals with three camshaft caps, while each camshaft flange was supported by a groove in the cylinder head to receive thrust force.
Description: It starts with doing well in exams.